1 Preface

1.2 Acknowledgements

Wolfgang Huber and Matthias Hentze for mentoring, advice and discussion. Benjamin Lang and Gian Tartaglia for great help with functional analysis and benchmarking, as well as feedback on the vignette. Ina Huppertz for helpful feedback and language improvement on the vignette. Mike Love, Simon Anders, Bernd Klaus and Frederick Ziebell for comments and discussion.

2 Introduction

2.1 Introduction to eCLIP sequencing

RNA-binding proteins (RBPs) play a key role in the life-time of RNAs. They are involved in RNA synthesis, stability, degradation, transport and translation and add an important layer of regulation in the cell. Over 1,900 murine and over 1,400 human RBPs were detected in different high-throughput detection studies, many of them without known RNA-binding function (Hentze et al. 2018).

It is of great interest to detect an RBP’s binding sites to study the underlying mechanism of its regulatory potential. Individual nucleotide resolution crosslinking and immunoprecipitation (iCLIP) (König et al. 2010) and the further enhanced CLIP (eCLIP) protocol (Van Nostrand et al. 2016) rely on UV crosslinking inducing covalent bonds of RNA and proteins in close proximity. When reverse transcribing the RNA fragment bound to the protein, a majority of the time the reverse transcriptase will terminate at the crosslink site. Although eCLIP introduces updates in chemistry, the use of a size-matched input (SMI) control sample is an essential addition to the protocol which can be also adapted to iCLIP or similar protocols.

Crosslink site trunction at reverse transcription

Figure 1: Crosslink site trunction at reverse transcription

In iCLIP and eCLIP, truncation events are extracted as one nucleotide position next to the cDNA fragment (aligned read). In the classical protocols real truncations cannot be distinguished from read-through reads or other reads coming from otherwise truncated reads, which might be caused by RNA modifications or the crosslinking sites of other proteins. This might be different for each individual proteins (and the remaining polypeptide of the digested protein). Other protocols like HITS-CLIP and PAR-CLIP (Hafner et al. 2010) rely exclusively on read-through events (although using other reverse transcriptases). While hybrid approaches exist, the technical difficulty of these protocols requires many optimizations steps, which makes them rather hard to combine.

Truncation sites (referred to as crosslink sites) are the neighboring position of the aligned read

Figure 2: Truncation sites (referred to as crosslink sites) are the neighboring position of the aligned read

In summary, iCLIP and eCLIP protocols provide count data for single-nucleotide positions which might be the result of many heuristic events. These are described in the next chapter.

2.2 The idea behind DEWSeq

2.2.1 Understanding the signal

2.2.1.1 Binding modes

Unlike transcription factors, RNA-binding proteins have many different binding modes (Hentze et al. 2018), some bind in a sequence specific manner, some have preference for structures (like stem-loops), some prefer to bind RNA modifications, others are mostly found at UTRs. A large portion of RBPs do not have a known RNA-binding domain and bind using disordered regions with unknown target preferences.

Different binding modes of RNA-binding proteins

Figure 3: Different binding modes of RNA-binding proteins

All these different binding modes can result in different crosslinking patterns, hence different truncation event patterns.

2.2.1.2 Chance of crosslinking

UV crosslinking at 254 nm is used to induce covalent chemical bonds within very close proximity of RNAs to proteins. This provides a “snapshot” of the RNA binding event and ensures that no disassociation of the RNA-protein complexes takes place in further steps. Typically, crosslinking with Stratlinker(R) UV crosslinkers has a limited efficiency of around 1% or less (depending on UV lamp intensity and time of irradiation). Newer crosslinkers with lasers reach up to 5-20% crosslinking efficiency depending on the protein and experimental setup.

Chance of crosslinking

Figure 4: Chance of crosslinking

Depending on the type of protein and the binding mode, this can result in different crosslinking patterns for each protein. While crosslinking affects all RBPs, the immunoprecipitation (IP) step should only enrich for RNA fragments bound to the RBP of interest. In turn, this means that crosslinked samples show a certain background which is different to normal expression patterns measured by RNA-sequencing.

2.2.1.3 Background and antibodies

2.2.1.3.1 Enrichment of targets

Immunoprecipitating your (crosslinked) protein and performing sequencing without any RNA digestion is called RIP-seq (without crosslinking) or HITS-CLIP (with crosslinking). These studies nicely show that the enrichment of your protein with antibodies, recognizing protein tags or native epitops will enrich RNA fragments bound to the protein. However, the immunoprecipitated (’IP’ed) samples closely resemble a full transcriptomic background. Depending on the specificity of your antibody, purification method (e.g. type of beads) and many other factors, this degree of resemblance can vary for different proteins. The authors do not know any cases where IP steps exclusively purify targets. If you find any such cases, please contact the authors, for further discussions (we would really like to know).

2.2.1.3.2 Contaminants vs background

If you take a closer look at the first iCLIP analysis protocols (and lot of protocols to date), you will notice that snoRNAs, lincRNAs and other short RNAs are excluded from the analysis, although they make up a majority of the signal. They were either treated as contaminants and dismissed right away, or more recently it was recommended to compare the i/eCLIP data with an orthogonal dataset like an RNA-seq knockout data and only look at the regions of interest that are common in both. As already mentioned, it was shown that size-matched input (SMI) controls can control for different artifacts coming from crosslinking and library preparation (Van Nostrand et al. 2016). After applying an enrichment correction it is possible to detect lincRNA, snoRNA binders.

As we previously discussed, crosslinked samples do have a different background compared to expressionlevels (as detected with RNA-seq). Therefore, it is of great importance to compare the IPed sample to a proper input control.
SMI controls can be easily applied to any CLIP protocols.

2.2.1.4 RNA fragment length and RNase concentrations

To narrow down the target RNAs to the binding site region, RNase is used to digest RNA not protected by your protein. Using different RNase concentrations will result in different RNA fragment lengths. In addition, it was shown that the crosslinking pattern will be affected by longer RNA fragments, which occurs as a result of the protein of interest binding closely together, protecting a larger RNA region from digestion (Haberman et al. 2017).

Different RNase concentrations will result in different fragment sizes.

Figure 5: Different RNase concentrations will result in different fragment sizes

2.2.1.5 Read-throughs

iCLIP and eCLIP depend on the termination of the reverse transcriptase at crosslink sites. In contrast, HITS-CLIP and PAR-CLIP need reverse transcriptases reading through the crosslink sites. Both methods use different reverse transcriptases with different likelihood of truncating or reading through (Hocq et al. 2018). The chance of this event will also be affected by the polypeptide which is left after protein digestion of the protein of interest.

Read-throughs

Figure 6: Read-throughs

“Read-through” events can truncate at crosslink sites from the same protein, a different protein, an RNA modification, any other unknown events or finish at the end of an RNA fragment. Due to the low efficiency the crosslinking of multiple proteins is usually less likely, however not improbable.

2.2.1.5.1 Early truncations

Early truncations can also occur on a long RNA fragment with multiple crosslink sites from different proteins or multiple crosslink sites from the same protein. Again, although low crosslinking efficiency reduces the chance of having multiple crosslink sites at once, those events occur stochastically.

Early truncation events

Figure 7: Early truncation events

2.2.2 Method

2.2.2.1 Differentially expressed sliding windows

Because of the properties of i/eCLIP data described above, we use a sliding window approach (where different window and step sizes can be chosen in the preprocessing step) and test for significant enrichment in the IP over the control. For this, we extended DESeq2 for a one-sided test: first, we filter windows with negative wald test statistic values (windows with negative log2FoldChange) followed a right-tailed test on the remaining windows. The advantage is that the filtering step increases performance when testing millions of windows.

Sliding window approach with single-nucleotide position count data

Figure 8: Sliding window approach with single-nucleotide position count data

2.2.2.2 Combining significant windows

In contrast to large fragments detected in ChIP-seq, the truncation sites are only one nucleotide. To combine windows in ChIP-seq dataset, csaw defines binding regions which are then subjected to multiple hypothesis correction. In ChIP-seq many windows share coverage from large cDNA fragments and therefore csaw performs multiple hypothesis correction on binding site with the SIMES method (SIMES 1986). SIMES joins coverage blocks and treats them as one entity for multiple hypothesis correction. In large, SIMES punished p-values for long stretches of overlapping windows. Please refer to the csawUserGuide for detailed description.

Single-nucleotide truncation events do not have the same property as cDNA fragments and the transcriptomic background for each gene in eCLIP or iCLIP often results in large coverage blocks. As seen in the picture below, the windows do only share information with the overlapping windows. Therefore, DEWSeq corrects the p-value for each overlapping window with the number of overlaps using Bonferroni correction.

Combining significant windows

Figure 9: Combining significant windows

We then apply FDR correction on the p-values corrected for overlaps using Bonferroni correction.

2.3 Prerequisits for DEWSeq

Most importantly, replicates and input controls are required for the significance testing for DEWSeq. Currently, we only allow the use of DESeq2’s wald test and LRT test. Please contact the authors if you would like to use more complex models in your analysis.

2.3.1 Input controls

Typically, CLIP-seq sa mples show a background which comes from a mix of various transcripts with different expression levels. Additionally, UV crosslinking does not affect RNAs in a linear fashion, therefore an appropriate input control is needed for the analysis of eCLIP/iCLIP data. Unfortunately, total RNA-seq does not reflect the UV crosslinked background. Also neither IgG-, empty beads, nor similar controls seem to be appropriate input controls. Mostly, IgG and empty bead controls suggest that the IP input is very clean, which is not what is seen in the data. IP sample often have a broad background signal and bias towards sno and lincRNAs, as well as other RNA types. Often, a majority of the reads in the IP come from such background, although the IgG and empty bead control samples cannot correct for that.

We recommend size-matched input controls (SMI) controls as performed in the eCLIP protocol (Van Nostrand et al. 2016). This type of input control is not protocol specific, therefore can be easily adapted to iCLIP or other CLIP studies. It proves useful to exclude many false positives and can control for truncations caused by interferences.

Combining significant windows

Figure 10: Combining significant windows

Empty beads controls are usually crosslinked and control for unspecific background caused through beads, IgG controls are usually crosslinked and control additionally for background caused by the invariable region of the antibody. No crosslink (noCL) controls for background caused by the protein and the functional antibody. SMI controls are crosslinked but not enriched, it controls among others for the background caused by crosslinked RNA.

DEWSeq uses SMI controls to calculate enrichment in the IPed samples. We recommend to use IgG or empty beads controls to flag (expression dependent) regions for optional removal.

2.3.2 Replicates

Biological replicates in high-throughput studies are needed in the significance testing process to ensure reproducibility of the results. Please refer to the csaw package for discussion on this topic.

In general, we recommend to ask yourself how many replicates would you use when performing RNA-seq. Usually, the answer is, at least three for the sample and three for the control (depending on many experimental factors which also will apply for your CLIP study). As a rule of thumb, your number of replicates should not be less if you are interested in an transcriptome wide analysis of your RNA-binding protein.

3 Data pre-processing

DEWSeq needs a countmatrix and preprocessed annotation. The preprocessing is done in two general steps.

  1. Raw data preprocessing, alignment and PCR duplication removal
  2. Extraction of crosslink sites, preprocessing of annotation and counting.

3.1 Raw data pre-processing

From fastq to bam files

eCLIP or iCLIP data preprocessing can be time-consuming. Generally, the pre-processing steps are:

  • Unique Molecular Identifiers (UMIs) extraction and demultiplexing (Je Suite, or other tools). Usually, the UMI is extracted from the fasta sequence and added to the header. Different tools add the UMI at different locations (beginning or end of fastq header).
  • Read quality filtering (optional)
  • Trimming of sequencing adapters (with tools like cutadapt)
  • Second trimming step (extremely important for standard paired-end eCLIP libraries). This is needed because a ‘bug’ in the standard paired-end eCLIP protocol.
    Hint: Single-read seCLIP (Van Nostrand et al. 2017) has a lot of advantages to standard, paired-end eCLIP, one of them is that you can skip this preprocessing step
  • Quality Control (fastqc with multiqc summary statistics or similar).
  • Alignment (Novoalign, STAR, or other (splice-aware) aligners, depending on your organism).
  • PCR duplication removal also called UMI evaluation Je Suite or custom tools depending on your protocol and single-read or paired-end setup. Please use tools which consider sequencing errors in the UMI and read sequences.
  • Sort and index bam files (samtools or similar)

Eventually, you will end up with sorted .bam files.

4 Detection of enriched regions with DEWSeq

DEWSeq uses a sliding window approach with DESeq2 for enriched binding sites.

4.1 Installation

DEWSeq can be installed from Bioconductor as follows:

if(!requireNamespace("BiocManager", quietly = TRUE))
    install.packages("BiocManager")
BiocManager::install("DEWSeq")

4.2 Load the library

First step is to load the required libraries with this command

require(DEWSeq)
require(IHW)
require(tidyverse)

4.3 Importing data for DEWSeq

This example uses ENCODE SLBP data set, contains two IP and one input control (SMI) samples which is not ideal, however it is small enough as test data.

countFile <- file.path(system.file('extdata',package='DEWSeq'),'SLBP_K562_w50s20_counts.txt.gz')
annotationFile <- file.path(system.file('extdata',package='DEWSeq'),'SLBP_K562_w50s20_annotation.txt.gz')

4.3.1 Read data

We need to read in the

  • count matrix and the (UNIQUE_ID, counts per sample)
  • annotation file (UNIQUE_ID, chromosome locations, other info)

which can be prepared with htseq-clip (see above)

For this, we recommend data.table or tidyr packages to read in the data swiftly. In our experience, data.table is significantly faster than tidyr.

require(data.table)

First we read in counts

countData <- fread(countFile, sep = "\t")

Then we read in the annotation data frame

annotationData <- fread(annotationFile, sep = "\t")

Let’s take a look at the data files: count data

head(countData)
##                           unique_ID   IP1   IP2   SMI
##                              <char> <int> <int> <int>
## 1: ENSG00000225630.1:exon0001W00014     5     1     4
## 2: ENSG00000225630.1:exon0001W00015     4     0     4
## 3: ENSG00000248527.1:exon0001W00013     2     1     5
## 4: ENSG00000248527.1:exon0001W00014    12     1    54
## 5: ENSG00000248527.1:exon0001W00015    12     1    79
## 6: ENSG00000248527.1:exon0001W00016     9     0    59
dim(countData)
## [1] 28569     4

and then annotation data

head(annotationData)
##    chromosome  begin    end width strand                        unique_id
##        <char>  <int>  <int> <int> <char>                           <char>
## 1:       chr1 629900 629949    50      + ENSG00000225630.1:exon0001W00014
## 2:       chr1 629920 629969    50      + ENSG00000225630.1:exon0001W00015
## 3:       chr1 633936 633985    50      + ENSG00000248527.1:exon0001W00013
## 4:       chr1 633956 634005    50      + ENSG00000248527.1:exon0001W00014
## 5:       chr1 633976 634025    50      + ENSG00000248527.1:exon0001W00015
## 6:       chr1 633996 634045    50      + ENSG00000248527.1:exon0001W00016
##              gene_id gene_name              gene_type gene_region Nr_of_region
##               <char>    <char>                 <char>      <char>        <int>
## 1: ENSG00000225630.1  MTND2P28 unprocessed_pseudogene        exon            1
## 2: ENSG00000225630.1  MTND2P28 unprocessed_pseudogene        exon            1
## 3: ENSG00000248527.1  MTATP6P1 unprocessed_pseudogene        exon            1
## 4: ENSG00000248527.1  MTATP6P1 unprocessed_pseudogene        exon            1
## 5: ENSG00000248527.1  MTATP6P1 unprocessed_pseudogene        exon            1
## 6: ENSG00000248527.1  MTATP6P1 unprocessed_pseudogene        exon            1
##    Total_nr_of_region window_number
##                 <int>         <int>
## 1:                  1            14
## 2:                  1            15
## 3:                  1            13
## 4:                  1            14
## 5:                  1            15
## 6:                  1            16
dim(annotationData)
## [1] 28569    13

Finally we have to create a sample description

colData <- data.frame(
  row.names = colnames(countData)[-1], # since the first column is unique_id
  type      = factor(
                c(rep("IP", 2),    ##  change this accordingly
                  rep("SMI", 1)),  ##
                levels = c("IP", "SMI"))
)

This function will parse the annotation file and create a DESeq object

ddw <- DESeqDataSetFromSlidingWindows(countData  = countData,
                                      colData    = colData,
                                      annotObj   = annotationData,
                                      tidy       = TRUE,
                                      design     = ~type)
## Warning in DESeqDataSetFromSlidingWindows(countData = countData, colData =
## colData, : countData is a data.table or tibble object, converting it to
## data.frame. First column will be used as rownames
ddw
## class: DESeqDataSet 
## dim: 28569 3 
## metadata(1): version
## assays(1): counts
## rownames(28569): ENSG00000225630.1:exon0001W00014
##   ENSG00000225630.1:exon0001W00015 ... ENSG00000210196.2:exon0001W00001
##   ENSG00000210196.2:exon0001W00002
## rowData names(8): unique_id gene_id ... Total_nr_of_region
##   window_number
## colnames(3): IP1 IP2 SMI
## colData names(1): type

This will return a DESeq object with the coordinates and annotation stores as rowAnnotation.

4.4 Estimating Size Factors

For library normalisation, rather than modifying the raw counts, DESeq2 estimates size factors which are incorportated in the anlaysis. For more information, please refer to the DESeq2 vignette.

The standard procedure to estimate size factors is

ddw <- estimateSizeFactors(ddw)
sizeFactors(ddw)
##       IP1       IP2       SMI 
## 0.8434327 0.5000000 2.3811016

4.5 Prefiltering

4.5.1 DESeq2 approach

Prefiltering becomes even more important with large numbers of sliding windows. Please find more details here: DESeq2 vignette on pre-filtering

keep <- rowSums(counts(ddw)) >= 10
ddw <- ddw[keep,]

4.5.2 max window count approach

Prefiltering can also be done based on htseq-clip output files. htseq-clip helper function createMaxCountMatrix outputs count matrix based on crosslink_count_position_max column in the output files from count function.

This filtering can be done as follows:

maxCountFile <- file.path(system.file('extdata',package='DEWSeq'),'SLBP_K562_w50s20_max_counts.txt.gz')
ddw <- filterCounts( object = ddw,maxCountFile = maxCountFile, 
                      countThresh = 5,nsamples = 2)
dim(ddw)
## [1] 6033    3

Based on data.frame in maxCountFile this function filters out all the windows with less than 5 counts in atleast 2 samples (out of a total of 3 in this example)

4.5.3 Estimate size factors based on a specific set of RNAs

CLIP data often shows high expression levels of small RNAs like snoRNAs, lincRNAs etc, therefore you might want to normalise based on protein coding genes only.

ddw_mRNAs <- ddw[ rowData(ddw)[,"gene_type"] == "protein_coding", ]
ddw_mRNAs <- estimateSizeFactors(ddw_mRNAs)
sizeFactors(ddw) <- sizeFactors(ddw_mRNAs)
sizeFactors(ddw)
##       IP1       IP2       SMI 
## 0.8105928 0.4311170 3.6384426

4.5.4 Estimate size factor for assymetric data

In general, when there is asymmetry in the data, like enrichment in IP over control, it is a good pratice to call differentially expressed features with DESeq2 and then exclude them for normalisation. This might be adjusted for your proteins.

First we identify significant windows in IP or the controls.

ddw_tmp <- ddw
ddw_tmp <- estimateDispersions(ddw_tmp, fitType = "local", quiet = TRUE)
ddw_tmp <- nbinomWaldTest(ddw_tmp)
ddw_tmp_results <- results(ddw_tmp,contrast = c("type", "IP", "SMI"),
                           tidy = TRUE, filterFun =  ihw)
tmp_significant_windows <- ddw_tmp_results %>%
                           dplyr::filter(padj < 0.05) %>% 
                           dplyr::pull(row)
rm(list = c("ddw_tmp", "ddw_tmp_results"))

Then we exclude those for the estimation of the size factors

ddw_mRNAs <- ddw_mRNAs[ !rownames(ddw_mRNAs) %in% tmp_significant_windows, ]
ddw_mRNAs <- estimateSizeFactors(ddw_mRNAs)
sizeFactors(ddw) <- sizeFactors(ddw_mRNAs)

rm( list = c("tmp_significant_windows", "ddw_mRNAs"))

sizeFactors(ddw)
##       IP1       IP2       SMI 
## 0.6659833 0.3525594 4.5150388

4.6 Differential expressed windows analysis

4.6.1 Estimate dispersion

We fit parametric and local fit, and decide the best fit following this Bioconductor post

First of all, define a variable called decide_fit and based on whether the value assigned to it is TRUE or FALSE dispersion fit can be decided

decide_fit <- TRUE
parametric_ddw  <- estimateDispersions(ddw, fitType="parametric")
if(decide_fit){
  local_ddw  <- estimateDispersions(ddw, fitType="local")
}

This is the dispersion estimate for parametric fit

plotDispEsts(parametric_ddw, main="Parametric fit")

This is the dispersion estimate for local fit, given automated decision fitting is enabled:

if(decide_fit){
  plotDispEsts(local_ddw, main="Local fit")
}

This will get the residuals for either fit, only for automated decision fitting

parametricResid <- na.omit(with(mcols(parametric_ddw),abs(log(dispGeneEst)-log(dispFit))))
if(decide_fit){
  localResid <- na.omit(with(mcols(local_ddw),abs(log(dispGeneEst)-log(dispFit))))
  residDf <- data.frame(residuals=c(parametricResid,localResid),
                        fitType=c(rep("parametric",length(parametricResid)),
                                  rep("local",length(localResid))))
  summary(residDf)
}
##    residuals           fitType         
##  Min.   : 0.000055   Length:12066      
##  1st Qu.: 1.130170   Class :character  
##  Median :17.049851   Mode  :character  
##  Mean   :11.681711                     
##  3rd Qu.:18.169236                     
##  Max.   :21.216533

and we plot histograms of the fits

if(decide_fit){
  ggplot(residDf, aes(x = residuals, fill = fitType)) + 
    scale_fill_manual(values = c("darkred", "darkblue")) + 
    geom_histogram(alpha = 0.5, position='identity', bins = 100) + theme_bw()
}

Now, we will decide for the better fit based on median

summary(parametricResid)
##    Min. 1st Qu.  Median    Mean 3rd Qu.    Max. 
##  0.0009  1.1233 17.4349 12.0150 18.6285 21.2165
if(decide_fit){
  summary(localResid)
  if (median(localResid) <= median(parametricResid)){
    cat("chosen fitType: local")
    ddw <- local_ddw
  }else{
    cat("chosen fitType: parametric")
    ddw <- parametric_ddw
  }
  rm(local_ddw,parametric_ddw,residDf,parametricResid,localResid)
}else{
  ddw <- parametric_ddw
  rm(parametric_ddw)
}
## chosen fitType: local

4.6.2 Call differentially bingind regions using wald test

The next step is to estimate the dispersions and perform the wald test with these two functions.

Please read up on fitType in the DESeq2 package and adjust according to your data set.

ddw <- estimateDispersions(ddw, fitType = "local", quiet = TRUE)
ddw <- nbinomWaldTest(ddw)

You can check the dispersion estimates with the following function:

plotDispEsts(ddw)
Dispersion Estimates

Figure 12: Dispersion Estimates

4.6.3 Significance testing

In the next step we perform a one-sided signficance test, looking for enrichment in the IP samples vs the SMI controls. Also it will perform a correction for p-values of overlapping windows: The function will determine how many overlapping windows for each window there are (this can vary at the end of features, e.g. a gene) and then perform Bonferroni for each window.

These family-wise corrected windows will corrected for multiple testing with Benjamini-Hochberg.

resultWindows <- resultsDEWSeq(ddw,
                              contrast = c("type", "IP", "SMI"),
                              tidy = TRUE) %>% as_tibble

resultWindows
## # A tibble: 3,169 × 20
##    chromosome    begin    end width strand unique_id gene_id gene_name gene_type
##    <chr>         <dbl>  <int> <int> <chr>  <chr>     <chr>   <chr>     <chr>    
##  1 chr1        1055024 1.06e6    49 +      ENSG0000… ENSG00… AGRN      protein_…
##  2 chr1        1055033 1.06e6    49 +      ENSG0000… ENSG00… AL645608… sense_in…
##  3 chr1        1055044 1.06e6    49 +      ENSG0000… ENSG00… AGRN      protein_…
##  4 chr1        1055053 1.06e6    49 +      ENSG0000… ENSG00… AL645608… sense_in…
##  5 chr1        1055064 1.06e6    49 +      ENSG0000… ENSG00… AGRN      protein_…
##  6 chr1       11908152 1.19e7    49 +      ENSG0000… ENSG00… RNU5E-1   snRNA    
##  7 chr1       11908172 1.19e7    49 +      ENSG0000… ENSG00… RNU5E-1   snRNA    
##  8 chr1       11908192 1.19e7    49 +      ENSG0000… ENSG00… RNU5E-1   snRNA    
##  9 chr1       11908212 1.19e7    49 +      ENSG0000… ENSG00… RNU5E-1   snRNA    
## 10 chr1       11908232 1.19e7    39 +      ENSG0000… ENSG00… RNU5E-1   snRNA    
## # ℹ 3,159 more rows
## # ℹ 11 more variables: gene_region <chr>, Nr_of_region <int>,
## #   Total_nr_of_region <int>, window_number <int>, baseMean <dbl>,
## #   log2FoldChange <dbl>, lfcSE <dbl>, stat <dbl>, pvalue <dbl>,
## #   pSlidingWindows <dbl>, pSlidingWindows.adj <dbl>

You might be interested to correct for multiple hypothesis testing with IHW.

resultWindows[,"p_adj_IHW"] <- adj_pvalues(ihw(pSlidingWindows ~ baseMean, 
                     data = resultWindows,
                     alpha = 0.05,
                     nfolds = 10))

Here some basic stats about the differentially expressed windows:

resultWindows <- resultWindows %>% 
                      mutate(significant = resultWindows$p_adj_IHW < 0.01)

sum(resultWindows$significant)
## [1] 1088

1088 windows are significant.

Here are the top 20 from 143 genes:

resultWindows %>%
   filter(significant) %>% 
   arrange(desc(log2FoldChange)) %>% 
   .[["gene_name"]] %>% 
   unique %>% 
   head(20)
##  [1] "HIST1H4J"  "HIST1H2BF" "HIST1H3J"  "HIST1H4H"  "HIST1H2BD" "HIST1H2BL"
##  [7] "HIST1H4B"  "HIST1H2BJ" "HIST1H2BG" "HIST1H2AG" "HIST1H4C"  "HIST1H3D" 
## [13] "HIST1H3H"  "HIST1H4I"  "HIST1H2BN" "HIST1H1E"  "H2AFX"     "HIST1H4E" 
## [19] "HIST2H2BE" "HIST1H2BC"

SLBP is an histone-RNA binding protein, so we are quite happy to see that the majority of the hits are coming from histone genes.

4.7 Combining regions

resultWindows contains information about the differential expression of windows. Now we would like to combine overlapping windows to a binding region.

resultRegions <- extractRegions(windowRes  = resultWindows,
                                padjCol    = "p_adj_IHW",
                                padjThresh = 0.01, 
                                log2FoldChangeThresh = 0.5) %>% as_tibble
## Warning in extractRegions(windowRes = resultWindows, padjCol = "p_adj_IHW", :
## windowRes is a data.table or tibble object, converting it to data.frame

Since we already corrected for the family wise error, we use the extractRegions function to combine the overlapping significant windows and provide metrics for best and worst p-adjusted value, as well as best and worst log2 fold change.

resultRegions
## # A tibble: 228 × 21
##    chromosome region_begin region_end strand windows_in_region region_length
##    <chr>             <dbl>      <int> <fct>              <dbl>         <int>
##  1 chr1           21727931   21728020 -                      3            89
##  2 chr1           28508719   28508762 +                      1            43
##  3 chr1           28508721   28508770 +                      1            49
##  4 chr1           28648620   28648730 +                      5           110
##  5 chr1           28648620   28648733 +                      5           113
##  6 chr1           44721786   44721855 -                      2            69
##  7 chr1           44731055   44731124 -                      2            69
##  8 chr1           44819864   44819933 -                      2            69
##  9 chr1           44819883   44819932 -                      1            49
## 10 chr1           75787879   75787948 +                      2            69
## # ℹ 218 more rows
## # ℹ 15 more variables: padj_min <dbl>, padj_mean <dbl>, padj_max <dbl>,
## #   log2FoldChange_min <dbl>, log2FoldChange_mean <dbl>,
## #   log2FoldChange_max <dbl>, regionStartId <chr>, gene_id <fct>,
## #   gene_name <chr>, gene_type <chr>, gene_region <chr>, Nr_of_region <dbl>,
## #   Total_nr_of_region <dbl>, window_number <dbl>, unique_ids <chr>

228 binding regions were found which can exported as BED file so you can browse the regions in your genome browser of choice or use it for further analyses.

toBED(windowRes = resultWindows,
      regionRes = resultRegions,
      fileName  = "enrichedWindowsRegions.bed")

Further analyses which can be done is enrichment of gene types, sequence motif analysis of the regions, secondary structure analysis of binding regions and other functional analyses.

5 Discussion

The authors very much welcome any feedback, comments and suggestions.

6 Session Info

sessionInfo()
## R version 4.4.0 beta (2024-04-15 r86425)
## Platform: x86_64-pc-linux-gnu
## Running under: Ubuntu 22.04.4 LTS
## 
## Matrix products: default
## BLAS:   /home/biocbuild/bbs-3.19-bioc/R/lib/libRblas.so 
## LAPACK: /usr/lib/x86_64-linux-gnu/lapack/liblapack.so.3.10.0
## 
## locale:
##  [1] LC_CTYPE=en_US.UTF-8       LC_NUMERIC=C              
##  [3] LC_TIME=en_US.UTF-8        LC_COLLATE=en_US.UTF-8    
##  [5] LC_MONETARY=en_US.UTF-8    LC_MESSAGES=en_US.UTF-8   
##  [7] LC_PAPER=en_US.UTF-8       LC_NAME=C                 
##  [9] LC_ADDRESS=C               LC_TELEPHONE=C            
## [11] LC_MEASUREMENT=en_US.UTF-8 LC_IDENTIFICATION=C       
## 
## time zone: America/New_York
## tzcode source: system (glibc)
## 
## attached base packages:
## [1] stats4    stats     graphics  grDevices utils     datasets  methods  
## [8] base     
## 
## other attached packages:
##  [1] data.table_1.15.4           lubridate_1.9.3            
##  [3] forcats_1.0.0               stringr_1.5.1              
##  [5] dplyr_1.1.4                 purrr_1.0.2                
##  [7] readr_2.1.5                 tidyr_1.3.1                
##  [9] tibble_3.2.1                ggplot2_3.5.1              
## [11] tidyverse_2.0.0             IHW_1.32.0                 
## [13] DEWSeq_1.18.0               BiocParallel_1.38.0        
## [15] DESeq2_1.44.0               SummarizedExperiment_1.34.0
## [17] Biobase_2.64.0              MatrixGenerics_1.16.0      
## [19] matrixStats_1.3.0           GenomicRanges_1.56.0       
## [21] GenomeInfoDb_1.40.0         IRanges_2.38.0             
## [23] S4Vectors_0.42.0            BiocGenerics_0.50.0        
## [25] R.utils_2.12.3              R.oo_1.26.0                
## [27] R.methodsS3_1.8.2           BiocStyle_2.32.0           
## 
## loaded via a namespace (and not attached):
##  [1] tidyselect_1.2.1        farver_2.1.1            fastmap_1.1.1          
##  [4] digest_0.6.35           timechange_0.3.0        lifecycle_1.0.4        
##  [7] magrittr_2.0.3          compiler_4.4.0          rlang_1.1.3            
## [10] sass_0.4.9              tools_4.4.0             utf8_1.2.4             
## [13] yaml_2.3.8              knitr_1.46              labeling_0.4.3         
## [16] S4Arrays_1.4.0          DelayedArray_0.30.0     abind_1.4-5            
## [19] withr_3.0.0             grid_4.4.0              fansi_1.0.6            
## [22] colorspace_2.1-0        scales_1.3.0            tinytex_0.50           
## [25] cli_3.6.2               rmarkdown_2.26          crayon_1.5.2           
## [28] generics_0.1.3          httr_1.4.7              tzdb_0.4.0             
## [31] cachem_1.0.8            zlibbioc_1.50.0         parallel_4.4.0         
## [34] BiocManager_1.30.22     XVector_0.44.0          vctrs_0.6.5            
## [37] Matrix_1.7-0            jsonlite_1.8.8          slam_0.1-50            
## [40] bookdown_0.39           hms_1.1.3               magick_2.8.3           
## [43] locfit_1.5-9.9          jquerylib_0.1.4         glue_1.7.0             
## [46] codetools_0.2-20        stringi_1.8.3           gtable_0.3.5           
## [49] UCSC.utils_1.0.0        munsell_0.5.1           lpsymphony_1.32.0      
## [52] pillar_1.9.0            htmltools_0.5.8.1       GenomeInfoDbData_1.2.12
## [55] R6_2.5.1                evaluate_0.23           lattice_0.22-6         
## [58] highr_0.10              bslib_0.7.0             Rcpp_1.0.12            
## [61] fdrtool_1.2.17          SparseArray_1.4.0       xfun_0.43              
## [64] pkgconfig_2.0.3

References

Haberman, Nejc, Ina Huppertz, Jan Attig, Julian König, Zhen Wang, Christian Hauer, Matthias W. Hentze, et al. 2017. “Insights into the design and interpretation of iCLIP experiments.” Genome Biology 18 (1). https://doi.org/10.1186/s13059-016-1130-x.

Hafner, Markus, Markus Landthaler, Lukas Burger, Mohsen Khorshid, Jean Hausser, Philipp Berninger, Andrea Rothballer, et al. 2010. “Transcriptome-wide Identification of RNA-Binding Protein and MicroRNA Target Sites by PAR-CLIP.” Cell 141 (1): 129–41. https://doi.org/10.1016/j.cell.2010.03.009.

Hentze, Matthias W., Alfredo Castello, Thomas Schwarzl, and Thomas Preiss. 2018. “A brave new world of RNA-binding proteins.” https://doi.org/10.1038/nrm.2017.130.

Hocq, Rémi, Janio Paternina, Quentin Alasseur, Auguste Genovesio, and Hervé Le Hir. 2018. “Monitored ECLIP: High accuracy mapping of RNA-protein interactions.” Nucleic Acids Research. https://doi.org/10.1093/nar/gky858.

König, Julian, Kathi Zarnack, Gregor Rot, Toma Curk, Melis Kayikci, Blaž Zupan, Daniel J. Turner, Nicholas M. Luscombe, and Jernej Ule. 2010. “ICLIP reveals the function of hnRNP particles in splicing at individual nucleotide resolution.” Nature Structural and Molecular Biology 17 (7): 909–15. https://doi.org/10.1038/nsmb.1838.

SIMES, R. J. 1986. “An improved Bonferroni procedure for multiple tests of significance.” Biometrika 73 (3): 751–54. https://doi.org/10.1093/biomet/73.3.751.

Van Nostrand, Eric L., Thai B. Nguyen, Chelsea Gelboin-Burkhart, Ruth Wang, Steven M. Blue, Gabriel A. Pratt, Ashley L. Louie, and Gene W. Yeo. 2017. “Robust, cost-effective profiling of RNA binding protein targets with single-end enhanced crosslinking and immunoprecipitation (SeCLIP)” 1648: 177–200. https://doi.org/10.1007/978-1-4939-7204-3_14.

Van Nostrand, Eric L, Gabriel A Pratt, Alexander A Shishkin, Chelsea Gelboin-Burkhart, Mark Y Fang, Balaji Sundararaman, Steven M Blue, et al. 2016. “Robust transcriptome-wide discovery of RNA-binding protein binding sites with enhanced CLIP (eCLIP).” Nature Methods 13 (November 2015): 1–9. https://doi.org/10.1038/nmeth.3810.